From design to done. Know what you can make.
Every design file in one place, linked to the supplies it takes to make it. ZoraMaker keeps your 3D prints, laser files, cut files and artwork together with your filament, wood, blanks and vinyl - so you can see at a glance what you own, what you can make, what each piece really cost, and what is ready to sell, on a marketplace or across the table at your next vendor show.
Your design. Your supplies. Counted.
An example of what ZoraMaker is being built to show you - a sample product, not a screenshot of a finished app. A laser file linked to the supplies one set takes. From what is on your shelf, it works out how many you could make; it keeps what is being made, what is finished and what you can actually sell apart, and never guesses a cost it does not know.
Walnut Mountain Coaster Set
- Process
- Laser engraving
- Set
- 4 coasters + box
- Version
- v3 (v1, v2 kept)
- mountain-coaster.lbrn2original
- mountain-coaster.svgoriginal
- listing-photo.jpgfrom v3
| Supply | Per set | On hand | Enough for | Cost per set |
|---|---|---|---|---|
| Walnut plywood 3 mm, 12×12 in | 0.5 sheet | 4 sheets | 8 sets | $3.10 |
| Cork backing, 4 in round | 4 | 31 | 7 sets | $0.88 |
| Kraft gift box | 1 | 20 | 20 sets | cost unknown |
Design, supplies, recipe, make, sell.
The same five steps whatever you make - a print farm's worth of filament or a table of laser-cut ornaments.
Keep your designs
Upload your files once - STL, 3MF, SVG, laser files, artwork. The original is never overwritten: a changed file becomes a new version beside it.
Track your supplies
Filament, wood, blanks, vinyl, packaging. Enter what you already have, and log what you order - it counts when it arrives, not before.
Link them in a recipe
Say what one piece takes: which design, how much of which supply, the packaging. Now ZoraMaker can tell you how many you could make.
Make a batch
Set supplies aside, record what was really used - misprints and offcuts included - and check what came out. Only good pieces reach your stock.
Sell it anywhere
Record a sale at a vendor show in a couple of taps, and your stock goes down at once. Online, hand your finished products to ZoraLister if you use it.
It never guesses your stock or your costs.
Most spreadsheets quietly turn "I don't know" into zero. ZoraMaker is being built on a few rules learned the hard way running a real maker business.
- An unknown cost stays unknown. It is flagged, never counted as $0 - so a price you set is based on what things really cost.
- Ordered is not received. Supplies count when they arrive. Half a delivery adds half.
- Your originals are never changed. Every edit or export sits beside the original file and points back to it.
- The same sale never counts twice. Tap "sold" twice by accident at a busy table, and your stock still goes down once.
- Failed pieces are not stock. Ten made, two rejected: eight to sell, and the supplies for all ten accounted for.
Almost anything you make and sell.
ZoraMaker starts you with the common crafts and lets you add your own kinds of design and supply - it is not built around any one machine.
3D printing
Filament and resin by the gram, print time, failed prints and purge waste.
Laser work
Wood, acrylic, leather, tumblers and blanks, with offcuts you can still use.
Vinyl cutting
Rolls and sheets by colour, transfer tape, decals and stickers.
Print and sublimation
Artwork files, blanks, paper and ink for shirts, mugs and prints.
And the rest
Candles, jewellery, resin art, sewing - add the design and supply types you need.
ZoraMaker works by itself
You don't need anything else to use it. If you sell only at markets and shows, ZoraMaker is the whole job: your designs, your supplies, what you made and what you sold.
And connects to ZoraLister, if you use it
Selling on TikTok Shop, eBay or Etsy too? ZoraLister turns your products into marketplace listings. Switch the connection on, and your finished products and their available quantities go across - so you list what you actually have.
ZoraMaker, plainly answered.
Can I use ZoraMaker today?
Not yet. ZoraMaker is in development. This page says what we are building so the makers who will use it can tell us what matters to them. Email support@zoramaker.com for early access and we will get in touch when there is something for you to try.
Do I need ZoraLister?
No. ZoraMaker works on its own - many makers sell only at markets and shows. If you also sell online with ZoraLister, you can connect the two so your finished products flow across.
Where are my design files kept, and who can see them?
With ZoraMaker online, in your own private account on our servers - that is what lets you reach them from any computer. Nobody else's account can see them, and nothing is ever shared or published unless you choose to. Your original files are never changed or overwritten.
What does it cost?
The price has not been set. It will be a subscription you pay for while you use it, and plans will likely differ by how much file storage you need. Early access testers will hear first.
Does it work at a vendor show?
That is one of the reasons it exists. Recording a sale at your table should take a couple of taps on your phone, and your stock goes down at once - so you know what is left before the next customer asks.
I print, engrave and cut vinyl. Is that three apps?
No - one account, one library, one supply shelf. Each design says which process it is for, and you can filter by craft when you want to.
Make what you sell? Help us build this.
We are looking for makers - 3D printing, laser, vinyl, sublimation or anything else - who want to shape ZoraMaker before it launches. Tell us what you make and how you keep track of it today.
Email support@zoramaker.com and tell us what you make, where you sell, and how you keep track of it now.